O.E. Style Ford Wheel | Primer

Starting at $95.00



Buying used vintage steel wheels can be a sketchy proposition, sometimes. You just don't know what you've got until you get them on the balancer or worse on the road. Coker Tire Company offers dozens of brand new premium OE replacement wheels for your car or truck. These classic steel wheels for Fords are primed and ready for painting in the color of your choice. They accepts standard outside-knob caps with 10 1/8 inch back diameter. Full size caps requiring nibs will not fit Accessories sold separately.
Brand SpecialtyWheel
Finish Primed
O.E. Style Ford Wheel | Primer
O.E. Style Ford Wheel | Primer

Please Note

  • Coker Tire Company warrants chrome and finish wheels and accessories to the original purchaser for a period of fifteen (15) months from the date of purchase. Oxidation or corrosion due to improper care, and/or adverse weather or chemicals is not covered by this warranty. Wheels that have been mounted, painted, or powder coated are considered used and cannot be returned. Please test fit the wheels before you mount or paint them. Please see specifications for Backspace and Bolt Pattern for each Part#. Caps and Accessories are Sold Separately.

Product Questions & Answers

(111) People thought this was helpful
What is the center bore measurement on these wheels?
By Visitor on March 10, 2016

The OE Ford wheel has a center hub hole diameter of 3.185 inches.

Coker Tire Support on March 10, 2016
Was this helpful?
(28) People thought this was helpful
will these fit a 1956 ford CV 15X6 5X41/2 bp 3.75 bs your pic shows to also fit the small hub cap?
By bill on March 14, 2016

It will be best to verify your bolt pattern as many older Fords have the larger 5x5 bolt pattern. These wheels require the larger, 10 1/8 inch cap. Here is a tutorial on measuring bolt pattern.

Coker Tire Support on March 15, 2016
Was this helpful?
(25) People thought this was helpful
Looking at these rims: SKU: OEPR147SF400 Bolt Pattern: 5x4 1/2 Finish: Primed Wheel size: 14x7 Cross section: Backspacing: 4.00 Series: OE Style. Can you verify they would fit a 1964 Mercury Parklane, and accept original hubcaps?
By David Waligoske on February 16, 2016

If you currently have the same 5x4 1/2 bolt pattern and 14 inch full size caps, then you should be able to use these wheels once you have determined a wheel wider than the factory 5.5" wide wheel would not cause any clearance issues on your car.

Coker Tire Support on February 18, 2016
Was this helpful?

Items 1 to 3 of 125 total

Show pages